Kyle has been with ATG for eight years and has 20 years of experience total in different facets of the AEC industry. Prior to joining ATG, Kyle spent 12 years working in electrical distribution with a heavy focus on preparing project takeoffs, estimations and electrical submittal packages.

Kyle is a seasoned veteran of the team, using his ATG knowledge and industry expertise with a focus on the Autodesk Construction Cloud and BIM 360 to successfully support construction teams.

Glenn has over 28 years of experience in the AEC industry, starting as a CAD drafter in industrial control systems before transitioning to CAD Designer and moving into AEC building design.

Glenn has worked for large and small engineering firms for industrial, commercial, and municipal projects. He attended the University of Arkansas at Little Rock to study electrical engineering technology and computer science. He has worked in electronics, machine design, industrial controls, electrical AEC building and civil design. Glenn strives to help clients achieve silver and gold certifications with his in-depth knowledge of AEC software.

Akash has experience with VDC coordination for MEP and understands the importance and capacity of BIM coordination projects from start to finish. He has a master’s degree in Construction Management from the University of New Haven, with work experience ranging from Intern to Project Manager for MEP and VDC.

Some notable projects include above-ceiling MEP coordination for eight middle/high school projects in the US, residential project management for Greenfield 4 in India, and residential project management from ground to finish for a duplex and triplex in India.

Jason has experience in Electrical and Low Voltage design and VDC coordination for MEP. He has an understanding of Value Engineering with experience on the contractor side to maximize profit. He has a bachelor’s degree in Mechanical Engineering from Farmingdale State College, with work experience ranging from low voltage design to electrical design.

Some notable projects include LaGuardia Airport, Target locations in New York, Amazon Warehouse, Walmart, WeWork HQ, Equinox, Bank of America and more.

Since 1999, Charles has served greater central Arkansas, including Little Rock/North Little Rock metropolitan areas, working at architecture, engineering, and consulting firms. Charles began his career in civil engineering, where he drafted wastewater and potable water system projects for small rural towns all around Arkansas. In 2002, he started drafting pre-engineered steel buildings for a small mom-and-pop mini-storage company and metal buildings nationwide. Fast forward to 2007, Charles made his way into the MEP industry and worked at several firms for HVAC design and drafting. During his time at these firms, Charles designed and drafted various HVAC systems for schools, hospitals, college dormitories, prisons, and office buildings. He has also worked on government projects, including renovations for Army Reserves and National Guard facilities and structures in several states in the south. 

Charles’ education includes associate degrees in Computer Aided Drafting & Design and Commercial Arts & Graphic Design. He is also certified through Military Naval Technical schools for sheet metal fabrication and repair and piping fabrication and repair. Charles has also completed rigging and welding courses at Arkansas Nuclear One.  

Charles proudly served in the US Navy for 21 years, and he spent 17 of those years repairing non-nuclear mechanical on several Sturgeon class and Los Angeles class nuclear-powered fast attack submarines, two Ohio class nuclear-powered Ballistic missile submarines, and one Nimitz class nuclear-powered aircraft carrier. In addition, he has also served on board a submarine tender and at several Naval repair facilities on Navy bases. Later in his Naval career, he worked at five naval shipyards for NAVSEA. Following the attacks on 9/11, Charles was mobilized in 2002 under operation Noble Eagle/Enduring Freedom and later Operation Iraqi Freedom to fight the war on terrorism. For four years, he was a part of the Naval security force and anti-terrorism and force protection for the US Navy. Charles’ military and civilian careers parallel each other; he uses his mechanical field knowledge and applies it to CAD HVAC design and drafting. This is where he drafts and designs mechanical and piping systems daily in civilian life and later installs and repairs marine mechanical and piping systems for the US Navy and NAVSEA. 

Since 2012, Greg has worked in Florida as an MEP Specialist and BIM/VDC draftsman and designer, specializing in the mechanical and plumbing trades. Clients have included various customers including Hospital group HCA, Advent Health, Disney, local home builders, and pool contractors.

Greg worked for a plumbing and mechanical contractor for eight years. For two years he led his own independent firm delivering MEP, architectural, and structural services as a draftsman and designer. Greg is well versed in AutoCAD, Fabrication, and CAD standards, and has over four years of hands-on construction experience as a plumber. Having had the experience of successfully running his own business, he brings sales, production, and technical experience to bear on customer issues. He uses his experience to solve problems and provide the best customer interaction possible.

Nathon has over five years of Revit experience and over 10 years in the MEP consulting engineer industry. He has a passion for helping MEP engineers manage, model and design MEP systems in Revit. He has a Bachelor of Science from Stephen F. Austin State University, with work experience ranging from CAD drafter to electrical engineering technician and BIM manager.

Some notable projects include US International Airport, Aubrey Elementary School, Pioneer Tower Fort Worth, HEB ASRS Warehouse, Grapevine Hilton Garden Inn and more.

Abdus’ professional experience consists of mechanical, electrical, and plumbing design, machine design and part fabrication, mechanical testing, project engineering, and management.

He has worked in Owensboro, KY as a mechanical design engineer in an MEP design firm, supporting the firm with MEP design and consulting on multiple projects such as institutional, commercial, and residential. Clients have included bio-processing plants, car dealerships, schools, and churches.

Abdus graduated from Lipscomb University with a bachelor’s degree in mechanical engineering and applied math. His course work consisted of thermodynamics, heat transfer, fluid mechanics, design of thermal fluid systems, mechanics of material, computational methods, and control systems.

Since graduating, he has worked in multiple disciplines, including machine design engineer and project engineer. He is currently pursuing an EIT certification followed by P.E licensures.